3-408.A. General Standards. All signs shall be maintained in good repair. A new permit shall be required prior to moving an existing sign from one location to another, or altering a sign in any manner other than for routine maintenance.

3-408.B. Compliance With Setback Requirements. Signs shall comply with the setback requirements of the zone district in which they are located and the principal use to which they apply, unless specifically excepted elsewhere in this Division. This does not apply to off-site signs that are approved in the right-of-way on Town maintained posts.

3-408.C. Traffic Safety. No sign shall be located so that the safety of a moving vehicle will be impaired by obscuring the driver’s vision or such that direct glare is caused on any public right-of-way. The color or format of signs shall not resemble or conflict with traffic signs or signals.

3-408.D. Illumination. Illumination of signs shall be arranged in such a manner as to be reflected away from residential properties and motorists’ vision.

3-408.E. Lettering Size Limit. No lettering on any sign, including cut out letter signs, shall exceed twelve inches (12") in height; except, that the initial letter in each word may be eighteen inches (18") in height.